This is as far as this particular project is going. I didn't have the patience to do a good job on this. Need to research the models a bit more and sort out the build sequence. This was a case of trying and see what comes out.
TQ+XE decals applied. I didn't have a white tail motif so had to go with a black outline. Need to check Doms listing. But at this scale...good enought
The engine panels are way overscale. I need a better modelling medium (and patience)
And from Lisa (or Port)
Didn't try lichtenstein antennas on this and not need to look at how to do the cockpit areas next time. So Patience and Research. Only one of which I am likely to be any good at.
As with all gamers, projects come and go. Models you were thinking of moving on get a new lease of life due to a comment in the Hobby or a movie on TV. This will hopefully be my record of my best endeavours not to start anything new until I have at least completed 75% of what I already have....as if that is ever going to happen ;)
Sunday, 13 January 2013
Saturday, 12 January 2013
Nightfighter - Scratch building Ta-154 (Pt 2)
Part 2 of this descent into madness. I now know why I buy all my models! I have neither the eye sight or steadiness of hand to sculpt green stuff into meaningful shapes. Or more probably I don't have the patience to wait long enough before picking up the model to start the next stage.
I have tried some panel lines in the green stuff but will need to redo them when the material cures slightly more. Need to try and put the Cannon channels on as well (or might just not bother)
Waiting to cure properly before getting some sanding treatment. Probably give this a quick brush with GW Liquid green stuff to smooth off.
Lichtenstein Antenna try out on the Do-17P carcass I had from the engine cannabilisation of the engines. I can make this in 2.7mm lengths which is about the right scale. It should protrude just over 1mm from the fuselage. I haven't tried the vertical blade elements yet which are 1.8mm in length.
Lessons Identified (because we don't necessarily learn from them) are that if I was to do another one (which is very likely).
I have tried some panel lines in the green stuff but will need to redo them when the material cures slightly more. Need to try and put the Cannon channels on as well (or might just not bother)
Waiting to cure properly before getting some sanding treatment. Probably give this a quick brush with GW Liquid green stuff to smooth off.
Lichtenstein Antenna try out on the Do-17P carcass I had from the engine cannabilisation of the engines. I can make this in 2.7mm lengths which is about the right scale. It should protrude just over 1mm from the fuselage. I haven't tried the vertical blade elements yet which are 1.8mm in length.
Lessons Identified (because we don't necessarily learn from them) are that if I was to do another one (which is very likely).
- The Neodymium magnet will be affixed to the wing section and the main fuselage build around it.
- Mako11 on TMP suggesting scaling down the plan and gluing to the top surfaces to help with panel scribing which is a lot better than doing it free hand.
- Make sure you have some decent modelling putty on hand before starting.
- Build the model in management sections and then stick them together. This reduces handling and the risk of damaging existing work.
Hopefully be able to sand and undercoat this evening after I get back from Rugby (I am refereeing this afternoon). Paint and decals are already identified so that element shouldn't take too long.
Friday, 11 January 2013
Nightfighter - P-61 Black Widows (Pt 1)
One of the iconic nightfighters. The Nightfighter game has two pacific scenarios which use the P-61. I had a pack of three! from Tumbling Dice and decided to make them up representative of the two Squadrons in the Scenario Book.
42-39576 from 418th Night Fighter Squadron was a P-61B model with the turret. The Yellow tail stripes also gave me something to model.
42-39713 from 548th Night Fighter Squadron was another B model but one that had the turret. The nose art was interesting as well!
For the third model in the pack I decided to do a European Theatre of Operations aircraft. 42-5547 from 422nd Night Fighter Squadron was selected. I chose it purely because it was green but also that it had shot down a V-1. I reckoned that the Op Diver scenario in the book could be altered to use a P-61. Other reason is that it used some colour in the form of the yellow radome.
I need to put the national insignia and decals on these three but they are progressing in the right direction.
42-39576 from 418th Night Fighter Squadron was a P-61B model with the turret. The Yellow tail stripes also gave me something to model.
42-39713 from 548th Night Fighter Squadron was another B model but one that had the turret. The nose art was interesting as well!
For the third model in the pack I decided to do a European Theatre of Operations aircraft. 42-5547 from 422nd Night Fighter Squadron was selected. I chose it purely because it was green but also that it had shot down a V-1. I reckoned that the Op Diver scenario in the book could be altered to use a P-61. Other reason is that it used some colour in the form of the yellow radome.
I need to put the national insignia and decals on these three but they are progressing in the right direction.
I have decided not to do Red numbers on the black P-61s due to the ongoing problem I have with printing black (I need to use a black background to print red using white decal paper)
Nightfighter - Scratchbuilding Ta-154 (Pt 1)
There isn't a 1/600th Ta-154 Moskito available and I only need one of these rare aircraft. So a suggestion on TMP that I scratchbuild one sent me off to the spares box. This is my record of how it went (or goes).
For a diagram I used a 3 view JPEG which I then scaled using Excel to give me approximate dimensions in 1/600th. The model should be about 20.9mm Long with a wingspan of about 27.6mm. Neither my eye sight or hands can get that precision so this will definitely be "That Looks About Right".
I decided to use stryrene strip and rod to make the basic frame and then use some white metal parts cut from a spare Do-17 that is in the spares box. Give everything a good coat of CA glue to give it some rigidity and then use Militput to mould the fuselage shape.
Basic framework completed
Close up (sorry about the quality)
The CA glue will be flooded on this afternoon and I might get the first miliput on this evening.
For a diagram I used a 3 view JPEG which I then scaled using Excel to give me approximate dimensions in 1/600th. The model should be about 20.9mm Long with a wingspan of about 27.6mm. Neither my eye sight or hands can get that precision so this will definitely be "That Looks About Right".
I decided to use stryrene strip and rod to make the basic frame and then use some white metal parts cut from a spare Do-17 that is in the spares box. Give everything a good coat of CA glue to give it some rigidity and then use Militput to mould the fuselage shape.
Basic framework completed
Closer shot. The P-61 is to show the relative size of the Ta-154
Close up (sorry about the quality)
The CA glue will be flooded on this afternoon and I might get the first miliput on this evening.
Subscribe to:
Posts (Atom)