Sunday, 20 July 2014

Modern - USMC in Iraq 2003 - M1A1s

Following up from some cracking modern games the other weekend, I decided to sort out my USMC forces. I have the rough equivalent of a platoon and to differentiate between squads, one is in desert camo with coyote brown web gear; one is in desert camo with green/BDU web gear and body armour and the last squad will be in MOPP gear with desert helmet cover and boots.

To support the platoon, which is mechanised in AAV-7P Amtracks I am adding a CAAT section and a pair of M1A1 Abrams.

I didn't fancy metal M1A1s as they do take a while to clean up and I would still want to add detail to them. So, I picked up a couple of the Zvezda hot wars kits.  These are similar to their art of tactic range for WW2 but are in hard plastic. There has been speculation that the M1A1 kit was sent for tooling too early and the model does have inconsistent levels of detail as you can see below. The turret is very basic while the hull has some good detail but then doesn't have any detail on the side skirts.





I added a M2 and an M240 from Peter Pig's M113 kit and added a BF M113 cupola. Out of scale but it gave me something to mount the M2 on without scratch building the whole mount and I had two left over.



I then added the Combat ID panels and the frame on the turret from Plastruct rod, before drilling out the antenna mounts.


 I also separated the track pads.




I now base all my vehicles so spent Saturday morning texturing and painting 6 bases for the Amtracks as well as the Abrams.




All the vehicles were mounted in one session and then left to dry.





Need to add some stowage and generally make these untidy plus an odd bit of touch up is still needed.

Friday, 11 July 2014

1/600th Aircraft - US Navy F-4s - Part 3

Tailcodes and artwork are going to be the biggest time consumer on this project.  A quick check through the books confirmed this as the only straightforward tail codes are for VF-114 on the Kitty Hawk with a simple NH scheme and then VF-103 and VF-31 on the Saratoga with AC tail codes.  



This is what the end state will hopefully look like once I add it to the model, noting that I can't print white and the yellow and red require white to achieve the colour, so this might have to be a two or three stage decal job with the arrow first on a white background, then paint the rest of the stabilizer in Gull Gray and then add the AC codes.  I have a similar problem with the VF-31 decal (and in fact any of them that need a bright colour :)  )

1/600th Aircraft - USN MiG Killers - Part 2

The text and numbers for all the aircraft has been designed which didn't take too long.  Just playing around with the actual fit of decals vs correct sizes as the TD model detail is exaggerated (as is anything at this scale).  Paul over at TD very kindly sent me the new air frames over this morning so I now have all the metal needed and might spend an hour or so this afternoon cleaning up the mould lines etc.

This is the current state of progress


This is the scaling that I have managed to get to with the decals and gives a rough approximation of the sizes I am using.  I have snap to grid on so I couldn't quite get the guides to match up to the font so the NAVY 6.0 might be an inch either way (at this scale).

I am out for dinner tonight and have family commitments over the weekend so nothing expected before sunday night, but MIGHT get a test print run off in draft just to check I haven't cocked anything up.

Wednesday, 9 July 2014

1/600th Aircraft - USN F-4 Phantom Mig Killer project.

It has been a while since I did any work on USN aircraft and a spare hour or two over last weekend gave me time to dust off some bare metal and get them undercoated.  Normally I concentrate on one aircraft at a time but that is taking a lot of time so I thought I would batch process the next ones up to try and see if I could produce all the F-4 Phantom Mig Killers from the two Osprey books

Current situation on aircraft as of today (9th July 2014) means that I need 16 air frames to start the project keeping some of the old models (10 B models and 6 Js) which is 6 packs of models, and 20 if I keep the old models and replace them with new metal (11 B Models and 9 Js) which is 7 packs .  The beauty of 1/600th aircraft means that it isn't too expensive :) and I can always find a use for the spare aircraft.....


Old and new scheme for those interested in the differences


Couple of shots of the ones in the new scheme.