As gaming pieces go these three are nearly finished. They were used as test pieces to try out decal configurations and ideas that I needed for the main project so future aircraft might not quite be the same as these....:)
VF-161 in the later scheme using a decal printed onto white decal paper and then touched up around the edges with black paint
VF-114 using a clear decal relying on the Deck Tan to provide the base for the orange. Decal in two pieces so might try and single one next time
VF-96 Falcons in the early scheme
Managed to get going on this project, but with most things I am suffering from word blindness and contradictory photo references.
The block of USN and USMC aircraft have all been: undercoated, VJ Deck Tan base coat applied, Canopies painted, radome colours applied and exhausts painted in; They have also all had the Stars n' Bars applied using Doms Decals.
I have then applied all the vertical lettering and numbers such as NAVY and the BuNo and Modex, that are black, as opposed to anything with a shear and or white.
I have added any coloured bands to the fin and wing tips where I can find a photo. Problem as always is the scribed detail being overscale so lines aren't quite where they should be which causes me a few problems with exact matches for Tail code and art work.
The VF-114 aircraft kept a vertical NH tail code which has been applied to both the early and later squadron schemes.
Anywhere I found a reference for Air Wing codes on the Starboard wing I also made up the lettering and Modex again if I found a reference.
VF-21, VF-111 and VF-96 aircraft have the tail art added as I had that left over from an earlier project, which now show where I didn't finish an aircraft from the earlier refresh such as the VF-21 aircraft below.
Current sat working up the decals for a couple of aircraft at a time to finish them off, working in Squadron order, rather than the order they appear in the book. This is to save time as it is always easier to work in a production fashion.
The problem, if you can call it that, is that photo references can send you down the wrong road. For example in the Osprey 1965 - 70 book the VF-114 aircraft on page 59, shows air wing identifier and Modex on the Starboard wing but doesn't have a black radome so no idea of the date of the photo. So right or wrong I have now put these markings on my VF-114 early aircraft only to find an earlier photo with no Modex....These are gaming models not display pieces so TLAR applies.
VF-96 early scheme on one aircraft finished. 30+ to go......;(
Part of the MiG killers allotment of aircraft are a couple of VF-114 "Aardvarks". As this is an interesting scheme to do (bright orange stripes) I used my lunch hour to see what it might look like using a quick mock up (and if it went well it would become the production version).
TD later F-4 model used a a base for the J Model. The lettering decals are from my standard set. The orange stripe however I scaled from some artwork. The problem is that it doesn't match the TD moulding as a result is about 2mm too short and also the black line isn't definitive. As it is too short it also comes together in a point rather than the square end that the real VF-114 aircraft had. Therefore I need to overscale the black lines to make it stand out more as well as look at the length and fitting.
As I have used a clear decal the walkway decals which I normally fit will have to be cut before fitting and then butt up against the stripe otherwise it will show through.
Other things that need to be done is the Kitty Hawk lettering needs to be resized as it is too large. The remainder of the decals went on okay and I gave everything a coat of Microsol to make sure it sank onto the moulding as well as it could.
I have also found that making the decals into PDF and then printing isn't a problem so I might put some up as a share later for those who fancy a go.
Anyway, back to work and I will strip this one back down (NAVY, Stripe and Kitty Hawk can all come off leaving the remaining decals in place) and see if I can get a better set made up tonight.
The remaining two M2A2 ODS that I bought, have now been given a basecoat of the Tamiya XF-59. I have added the rear Id Panels (sorry bored you enough with those now) as well as the covers for the gunner's sight.
Early shot showing the the styrene panels. They are way overscale but good enough for me to game with
Base coat added and on this one (which will be callsign 112) I have taken the last panel off as well.
Compared to the first one from the rear
And from the front with the revised sight which is only 3 pieces of styrene
Need to decide on how the antenna's will be added yet (but I can do that at a later stage) and as I have two M1A1 to do as well the next highlight coats will be added when I do all the models together. Then on to markings and stowage and basing
Already lost interest in these ;) and thinking of going back to the MiG Killer project